Mitsubishi Electric MELSEC iQ-R04ENCPU - Area for both Systems Identical IP Address Setting Function; Communication Path Determination Status; Dynamic Routing Function Area; Remote Password Function Monitoring Area

APPX
Appendix 3 Buffer Memory
361
A
Dynamic routing function area
■Communication path determination status (Un\G11500 to Un\G11514)
The determination status of the communication path for each network number of the destination station is stored.
• 0: Path undetermined
• 1: Path determined
The numbers in the table indicate network numbers.
Remote password function monitoring area
The number of times each connection and system port remote password unlocking failed continuously is counted in the range
of 0 to 65535.
Area for both systems identical IP address setting function
■Control system IP address (Un\G11670 to Un\G11671)
The control system IP address set with the module parameter is stored.
Address b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 0
Un\G11500 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1

Un\G11514 Empt
y
239 238 237 236 235 234 233 232 231 230 229 228 227 226 225
Address Name
Un\G11600 Connection No.1 continuous unlock failure count
Un\G11601 Connection No.2 continuous unlock failure count

Un\G11662 Connection No.63 continuous unlock failure count
Un\G11663 Connection No.64 continuous unlock failure count
Un\G11664 Auto-open UDP port continuous unlock failure count
Un\G11665 MELSOFT transmission port (UDP/IP) continuous unlock failure count
Un\G11666 MELSOFT transmission port (TCP/IP) continuous unlock failure count
Un\G11667 FTP transmission port (TCP/IP) continuous unlock failure count
Un\G11668 MELSOFT direct connection continuous unlock failure count
Address Description
Un\G11670 Third octet, fourth octet
Un\G11671 First octet, second octet