1 FUNCTIONS
1.12 Web Server Function
151
1
Figure display (WSFigure)
When the device value is within the specified range, a figure is displayed in the specified color. The device value is monitored
in the fixed interval.
• figType = 'Oval' (oval)
• figType = 'Rect' (rectangle)
• figType = 'Tri' (triangle)
When a negative value is set for the figure height (figHeight), the downward triangle is displayed.
Set range[n] for the range of the display color to be displayed. (n: 0 to 4)
: Required, : Optional
Parameter Item Description Requirement
devName Device name Device type + device number
devFormat The data format of the device 0: 16-bit signed
1: 16-bit unsigned
2: 32-bit signed
3: 32-bit unsigned
4: Single-precision real number
5: Double-precision real number
6: Bit
figType Figure type Oval: Oval (When specifying a circle, set the figure height =
width.)
Rect: Rectangle (When specifying a square, set the figure height
= width.)
Tri: Triangle
figHeight Figure height Real numbers (unit: px)
When a negative value is set, the value is treated as an absolute
value.
figWidth Figure width
defCol Default display color The RGB value or color name
(This item is displayed when the device value is out of the setting
range.)
rangeNum Number of setting ranges 1 to 5
range[0].low Lower limit of setting range 1 A numeric value (decimal) within the range of the specified data
format.
range[0].high Upper limit of setting range 1
xPos
yPos
figWidth
figHeight
defCol
range[n].col
Window
range[n].high ≥ Current value ≥ range[n].low
xPos
yPos
figWidth
figHeight
defCol
Window
xPos
yPos
figWidth
figHeight
defCol
Window
To Next Page
Loading...
