Mitsubishi Electric MELSEC iQ-R08ENCPU - When the Communication Destination Is an SLMP-Compatible Device; When the Communication Destination Is the MELSEC-L

186
1 FUNCTIONS
1.14 Simple CPU Communication Function (CPU Module (Built-in Ethernet Port Part))
■When the communication destination is the MELSEC-L (built-in Ethernet)
*1 The maximum number of points for the L26CPU. The number of points varies depending on the model of the CPU module used.
*2 The maximum number of points when D (extended data register) or W (extended link register) is set.
*3 Data is read or written following the file register settings of the communication destination.
■When the communication destination is an SLMP-compatible device (QnA-compatible 3E
frame)
Applicable devices differ depending on the device. For applicable devices, refer to the manual for the device used.
The device types that can be set are X, Y, M, L, B, SB, SM, D, W, SW, SD, R, and ZR. The accessible device range of the
communication destination is the range which can be specified with the subcommands 001 and 000 of the SLMP (QnA-
compatible 3E frame of the MC protocol).
Type Applicable device
*1
Symbol Range
Bit device X 0H to 1FFFH
Y 0H to 1FFFH
M 0 to 61439
L 0 to 32767
B 0H to EFFFH
SB 0H to 7FFFH
SM 0 to 2047
Word device D
*2
0 to 421887
W
*2
0H to 66FFFH
SW 0H to 7FFFH
SD 0 to 2047
R
*3
0 to 32767
ZR
*3
0 to 393215