122
4 AUXILIARY AND APPLIED FUNCTIONS
4.8 File Transmission at Boot Function
File transmission at boot procedure
The procedure for performing a file transmission at boot from the SD memory card to the standard ROM is shown below.
Create boot operation file
Using a personal computer, create the boot operation file (boot01.csv), and write the boot operation file (boot01.csv) to the
"$MMTPRJ$" folder in the SD memory card.
Set parameters of the Motion CPU
Set the file transmission at boot parameters in [Motion CPU Common Parameter] [Basic Setting] "File Transmission
Setting during Booting". (Page 61 Basic setting)
Write the parameters to the Motion CPU, and turn Multiple CPU system power supply OFF to ON, or reset.
The status of file transmission at boot can be checked with "Boot file transfer information (SD509)"
Write data to SD memory card
Install the SD memory card to the Motion CPU, and write the files to be used in file transmission at boot to the SD memory
card using MT Developer2.
Execute file transmission at boot
Execute the boot operation file (boot01.csv) in the SD memory card by turning Multiple CPU system power supply ON to OFF,
or reset.
The processing details of the file transmission at boot are stored in the standard ROM and SD memory card as a boot log file
(bootlog.txt).
Check the contents of the boot log file (bootlog.txt) using a personal computer to view the boot log file
(bootlog.txt) in the "$MMTPRJ$" folder in the SD memory card.
To Next Page
Loading...
