Mitsubishi Electric MELSEC iQ-R16MTCPU - IAI Electric Actuator Controller Manufactured by IAI Corporation

286
5 FUNCTIONS USED WITH SSCNET COMMUNICATION
5.8 Compatible Devices with SSCNETIII(/H)
IAI electric actuator controller manufactured by IAI Corporation
The IAI Corporation made IAI electric actuator controller can be connected via SSCNET/H. Contact your nearest IAI sales
office for details of IAI electric actuator controller.
IAI electric actuator controller cannot be used on a line where the communication type in SSCNET setting of
MT Developer2 is set to "SSCNET".
System configuration
The system configuration using IAI electric actuator controller is shown below.
The IAI electric actuator controller can only be set on even-numbered axes.
SSCNET
µ
cable
MR-J3BUSM(-A/-B)
R64MTCPU: 2 lines (Up to 64 axes (32 axes per line))
R32MTCPU: 2 lines (Up to 32 axes (16 axes per line))
R16MTCPU: 1 line (Up to16 axes)
Motion CPU module
RMTCPU
SSCNET
µ
/H(CN1)
Servo amplifier
MR-J4(W)-B
IAI electric actuator
controller
SSCNET
µ
/H(CN2)
Servo amplifier
MR-J4(W)-B
IAI electric actuator
controller