Mitsubishi Electric MELSEC iQ-RJ71C24-R2 - Programmable Controller CPU Monitoring Function; Data Registration for Using the Programmable Controller CPU Monitoring Function

120
6 USING THE PROGRAMMABLE CONTROLLER CPU MONITORING FUNCTION
6.2 Programmable Controller CPU Monitoring Function
6.2 Programmable Controller CPU Monitoring
Function
This section explains the programmable controller CPU monitoring function.
Data registration for using the programmable controller CPU
monitoring function
The following explains the data registration by the user to use the programmable controller CPU monitoring function.
Registration procedure for the Programmable Controller CPU monitoring function
Programmable controller CPU monitor registration for C24 that is required to use the programmable controller CPU
monitoring function is described in the following sections. The registration can be performed using one of the following
methods:
• Registration with an Engineering tool
• Registration using the programmable controller CPU monitoring registration command (0630) for communication with the
MC protocol (MELSEC Communication Protocol Reference Manual)
• Registration using the programmable controller CPU "CSET" instruction ( MELSEC iQ-R Programming Manual
(Instructions, Standard Functions/Function Blocks)
Combination with modem function
Before transmitting the CPU module monitoring result when used in conjunction with the modem function, register the data for
connection of the modem function.
Navigation window  [Parameter]  [Module Information]  Module Name  [Module Parameter]  "Application
Settings"  "Modem function setting"
Starting programmable controller CPU monitoring function
By registering the data for using the programmable controller CPU monitoring function, C24 begins monitoring the
programmable controller CPU.