Mitsubishi Electric MELSEC iQ-RJ71C24-R2 - Send;Receive Data Monitoring Function Settings

390
20 USING SEND/RECEIVE DATA MONITORING FUNCTION
20.2 Send/receive Data Monitoring Function Settings
20.2 Send/receive Data Monitoring Function Settings
This section explains how to configure the settings for the send/receive data monitoring function.
The settings are configured with Engineering tool or by program.
Setting with Engineering tool
The setting items for the send/receive data monitoring function are listed below.
Navigation window  [Parameter]  [Module Information]  "Module Name"  [Module Parameter]  "Basic Settings"
 "Various control specification"
■Parameter settings
Parameter setting item Description
Basic
settings
Various
control
specificati
on
Send/receive data
monitoring
function
specification
Send/receive data monitoring function
specification
Select "monitor start instruction" for constant monitoring.
Stop at buffer full specification Select "ON" to stop monitoring when the monitor data area is full.
0 timer error outbreak stop designation Select "ON" to stop monitoring when a timer 0 error occurs.
Monitor buffer start address
designation
Designate the value to change the monitor buffer address. (Default:
2600H/3300H)
Monitor buffer size designation Designate the value to change the monitor buffer size (Default: 0D00H)