556
APPENDICES APPENDIX
Appendix 7 When Connecting the Module to a Remote Head Module
7. Click the "Variable unset error" cell on the "Packet Setting" screen
8. Enter 'W0' to "Send Data Storage Area" on the "Element Setting" screen.
9. Set the packet settings in the "Variable Unset" cell of "Packet Setting" on the "Protocol Setting" screen with the same
procedure (from step 5 to step 8).
Set the following values for the data storage area.
10. Select [Online] [Write to Module] from Engineering tool.
11. Select "CPU Built-in Memory" in "Target Memory" on the "Write to Module" screen, and click the [Execute] button.
Packet name Element number Element name Data storage area
specification
NOR/0601H:RD Controller Status 2 Communication Unit No. Set 'W1000'
8 Operation Status Set 'W1001'
9 Related Information Set 'W1002'
ERR/0601H; RD Controller Status 2 Communication Unit No. Set 'W1000'
7 Response Code Set 'W1003'
ERR: Command Finished Abnormally 2 Communication Unit No. Set 'W1000'
4 End Code Set 'W1004'
To Next Page
Loading...
