Mitsubishi Electric MELSEC iQ-RJ71C24-R4 - Checking with Engineering Tool

114
5 DEBUG SUPPORT FUNCTION
5.2 Protocol Execution Log Storage Function (for Predefined Protocol only)
Checking with Engineering tool
Check the protocol execution logs and protocol execution results in the "Protocol Execution Log" screen of Engineering tool.
Operating procedure
1. Select a module to be debugged.
• Display the "Protocol Setting" screen. (Page 27 Data Communication Procedure)
• Select "Protocol Setting"  [Debugging Support Function]  [Module Selection].
• Select the I/O address and channel of the module to be debugged, and click the [Set] button.
• As the [OK] button is clicked, the module information is set.
2. Execute the CPRTCL instruction.
3. Select "Protocol Setting"  [Debugging Support Function]  [Protocol Execution Log].
Window
The logs displayed in the "Protocol Execution Log" screen can be selected from the following two items,
according to the log registration condition.
• Displaying only protocol that completed abnormally.
• Displaying all protocol execution status and execution logs.
The log registration condition can be set in "Execution log options" in the "Various control specification" screen
of Engineering tool.