Mitsubishi Electric MELSEC iQ-RJ71C24-R4 - Settings for Using the Programmable Controller CPU Monitoring Function; Parameter Setting Items for the Programmable Controller CPU Monitoring Function

138
6 USING THE PROGRAMMABLE CONTROLLER CPU MONITORING FUNCTION
6.3 Settings for Using the Programmable Controller CPU Monitoring Function
6.3 Settings for Using the Programmable Controller
CPU Monitoring Function
This section describes system settings required for fixed cycle send and condition match send.
Parameter setting items for the programmable controller CPU
monitoring function
The following explains parameter setting items for the programmable controller CPU monitoring function.
Configure the parameter settings.
Navigation window  [Parameter]  [Module Information]  Module Name  [Module Parameter]  "Application
Settings"  "Programmable Controller CPU monitoring function setting"
• Register send user frames by Engineering tool, after checking the specifications and setting methods
explained in the following sections. (Page 250 CONTENTS AND REGISTRATION OF USER FRAMES
FOR DATA COMMUNICATION, Page 276 DATA COMMUNICATIONS USING USER FRAMES)
• Register connection data for the modem function by Engineering tool, after checking the specifications in
the following section. (Page 182 Method to register/read/delete data for connection)
Setting items and requirement for communication using the MC protocol
: Required, : Not required
*1 n=1 to 10
Setting item Fixed cycle
send
Condition
match send
Reference
Programmable controller CPU monitoring function designation Page 139 Programmable controller
CPU monitoring function designation
Cycle time units designation Page 139 Cycle time units designation
Cycle time designation (Programmable controller CPU monitoring interval time) Page 139 Cycle time designation
(Programmable controller CPU
monitoring interval time)
Send pointer designation Page 141 Setting items for
transmitting monitoring results
Output quantity designation
Block monitoring device Registered word block quantity designation Page 140 Registered word block
quantity designation, Registered bit
block quantity designation
Registered bit block quantity designation
CPU error monitoring designation Page 140 CPU error monitoring
designation
n-th block
monitoring
device
*1
Monitoring device designation Page 140 Monitoring device
designation, start device number
designation, number of read points
designation
Start device No. specification
Number of read points
specification
Monitoring condition value
designation (judgment condition
designation)
 Page 140 Monitoring condition
specification (Judgment condition
specification)
Monitoring condition
specification
Page 140 Monitoring condition value
designation
Send pointer designation  Page 141 Setting items for
transmitting monitoring results
Output quantity designation
CPU error
monitoring
designation
Send pointer designation Page 141 Setting items for
transmitting monitoring results
Output quantity designation