358
17 COMMUNICATING WITH ASCII CODE (ASCII-BIN CONVERSION)
17.4 Data Communication Using Nonprocedural Protocol
(0) Set the transmission channel to CH1.
Set CR/LF to "Do not send".
Set the send pointer to 1.
Set the output quantity to 5.
Set the send data length to 2WORD.
Set an arbitrary send data.
Set an arbitrary transmitted data in send buffer.
Set the data to be transmitted to user frame 8001H.
Set the transmission direction.
(41) Execute user frame transmission.
(88) Normal completion
(90) Abnormal completion
To Next Page
Loading...
