126
5 TROUBLESHOOTING
5.6 List of Error Codes
3E11H An error was detected in the memory. • Take measures to reduce noise.
• Reset the CPU module, and then switch it to RUN
mode. If the error occurs again even after the above
action is taken, the possible cause is a hardware
failure of the CPU module. Please consult your local
Mitsubishi representative.
3E19H An error was detected in the memory. • Take measures to reduce noise.
• Format the memory. After that, write all the files,
reset the CPU module, and then switch it to RUN
mode.
• If the error occurs again even after the above action
is taken, the possible cause is a hardware failure of
the CPU module. Please consult your local
Mitsubishi representative.
3E1AH to
3E21H
An error was detected in the memory. • Take measures to reduce noise.
• Reset the CPU module, and then switch it to RUN
mode. If the error occurs again even after the above
action is taken, the possible cause is a hardware
failure of the CPU module. Please consult your local
Mitsubishi representative.
3E23H to
3E24H
An error was detected in the memory. • Take measures to reduce noise.
• Reset the CPU module, and then switch it to RUN
mode. If the error occurs again even after the above
action is taken, the possible cause is a hardware
failure of the CPU module. Please consult your local
Mitsubishi representative.
3E26H to
3E2BH
An error was detected in the memory. • Take measures to reduce noise.
• Reset the CPU module, and then switch it to RUN
mode. If the error occurs again even after the above
action is taken, the possible cause is a hardware
failure of the CPU module. Please consult your local
Mitsubishi representative.
3F80H to
3F87H
An error was detected in the memory. • Take measures to reduce noise.
• Reset the CPU module, and then switch it to RUN
mode. If the error occurs again even after the above
action is taken, the possible cause is a hardware
failure of the module on which the error occurred.
Please consult your local Mitsubishi representative.
3F8FH to
3F97H
An error was detected in the memory. • Take measures to reduce noise.
• Reset the CPU module, and then switch it to RUN
mode. If the error occurs again even after the above
action is taken, the possible cause is a hardware
failure of the module on which the error occurred.
Please consult your local Mitsubishi representative.
3FA0H An error was detected in the memory. • Take measures to reduce noise.
• Reset the CPU module, and then switch it to RUN
mode. If the error occurs again even after the above
action is taken, the possible cause is a hardware
failure of the module on which the error occurred.
Please consult your local Mitsubishi representative.
Error
code
Error details and causes Action Detailed information
To Next Page
Loading...
