3 EtherNet/IP Configuration Tool
3.1 Window Structure
55
3
Network
Perform operations such as detecting EtherNet/IP devices on the network to add them to the network configuration settings
and configuring the settings for EtherNet/IP communications.
This item can be selected when EtherNet/IP Configuration Tool is switched to the online state and "Network Detection" is
displayed. ( Page 49 Window Structure)
*1 This action can be performed when an EtherNet/IP device to which a module can be mounted is selected in "Network Detection". (
Page 49 Window Structure)
■"Choose Network Adapter" window
Select the network adapter to use in EtherNet/IP communications from the list of network adapters detected with EtherNet/IP
Configuration Tool.
When the "Automatic" check box is selected, all the detected network adapters are used in EtherNet/IP communications.
[Network] Ö [Choose Network Adapter]
Item Description
Choose Network Adapter Opens the "Choose Network Adapter" window. ( Page 55 "Choose Network Adapter" window)
Read Network Configuration Scans the network to detect EtherNet/IP devices on the "Network Detection" tab. ( Page 60 Detecting the
RJ71EIP91 and EtherNet/IP devices)
Online Action Opens the "Online Action" window. ( Page 62 "Online Action" window)
Insert in Configuration Adds the selected EtherNet/IP device to the network configuration settings. ( Page 96 Configuring settings online)
Insert and Replace All Deletes all the EtherNet/IP devices set in the network configuration settings and adds all the EtherNet/IP devices
detected by "Network Detection".
Properties Opens the properties of the selected EtherNet/IP device. ( Page 61 EtherNet/IP device properties)
*1
Item Description
IP Address Displays the IP address of the network adapter.
Adapter Name Displays the name of the network adapter.
To Next Page
Loading...
