Mitsubishi Electric MELSEC iQ-RJ71EIP91 - Page 58

56
3 EtherNet/IP Configuration Tool
3.1 Window Structure
Device
Perform operations such as adding the selected EtherNet/IP device to the network configuration settings, configuring the
settings for EtherNet/IP devices, and enabling diagnostic mode.
*1 This action can be performed when an EtherNet/IP device is selected in the network configuration settings. ( Page 49 Window
Structure)
*2 This action can be performed when an EtherNet/IP device to which a module can be mounted is selected in the network configuration
settings.
*3 This action can be performed when EtherNet/IP Configuration Tool is switched to the online state. ( Page 50 File)
Help
The help or version information of EtherNet/IP Configuration Tool is displayed.
Item Description
Duplicate Adds a copy of the selected EtherNet/IP device to the network configuration settings.
*1
Delete Deletes the selected EtherNet/IP device from the network configuration settings.
*1
Add Adds the modules for EtherNet/IP devices to which modules can be mounted.
*2
Collapse/Expand All Collapses/expands the module tree in the network configuration settings.
Properties Opens the properties of a selected item as shown below.
• When "Ethernet" in the network configuration settings is selected: Page 68 "Channel Properties" window
• When the EtherNet/IP module display in the network configuration settings is selected: Page 74 IP address
management window
• When the EtherNet/IP display in the network configuration settings is selected: Page 75 EtherNet/IP device
setting window (Class1 instance communications),Page 90 EtherNet/IP device setting window (Class1 tag
communications)
• When other item in the network configuration settings is selected: The window corresponding to the selected item is
displayed. Displayed content varies depending on the EtherNet/IP device used.
For names of each display, refer to the following.
Page 66 Display content
Diagnostic Enables diagnostic mode. ( Page 114 Network diagnostics of EtherNet/IP Configuration Tool)
*3
Options Opens the "Display Option" window. ( Page 67 "Display Option" window)
Item Description
EIP-CT Help Opens the help of EtherNet/IP Configuration Tool.
About Displays the version information of EtherNet/IP Configuration Tool. ( Page 97 Checking the Software Version)