3 EtherNet/IP Configuration Tool
3.1 Window Structure
75
3
EtherNet/IP device setting window (Class1 instance communications)
Set the parameters of the EtherNet/IP device used in Class1 instance communications.
Select the EtherNet/IP display in the network configuration settings.
*1
Ö [Device] Ö [Properties]
*1 For names of each display, refer to the following.
Page 66 Display content
Depending on the connected EtherNet/IP device, some tabs may not be displayed in the EtherNet/IP device
setting window.
To Next Page
Loading...
