3 EtherNet/IP Configuration Tool
3.1 Window Structure
81
3
*1 Large Forward Open must be available for the EtherNet/IP device when this item is specified to 505 bytes or more.
For details, refer to the manuals of the EtherNet/IP device.
*2 Variable connections must be available for the EtherNet/IP device when this item is specified to "Variable".
For details, refer to the manuals of the EtherNet/IP device.
*3 Regardless of this setting, the RJ71EIP91 sends data with the size specified with "Output Size".
Output - O->T Output Size Specifies the size of the output data. (Unit: Bytes)
*1
0 to 1444
(Default: Varies depending on the
EtherNet/IP device)
Output Mode Specifies the target to which the output data is written.
• Point to Point: Unicast (one to one) communications are performed.
• Multicast: Multicast (one to many) communications are performed.
• Null: Communications are not performed.
• Point to Point
• Multicast
•Null
(Default: Varies depending on the
EtherNet/IP device)
Output Type Specifies the output type (variable or fixed) according to the size of the
output data.
*3
• Variable: Communications are performed with a variable size.
*2
• Fixed: Communications are performed with a fixed size.
• Variable
•Fixed
(Default: Varies depending on the
EtherNet/IP device)
Priority Specifies the priority of the communication packet for the currently set
connection.
• High: Processing is performed with high priority.
• Low: Priority is given to the processing of connections set to "High".
• Scheduled: Packets are processed in the receiving order regardless of
priority.
•High
•Low
• Scheduled
(Default: Varies depending on the
EtherNet/IP device)
Request Packet
Interval(RPI)
Specifies the communication cycle. (Unit: ms) 0.5 to 60000
(Default: Varies depending on the
EtherNet/IP device)
Item Description Setting range
To Next Page
Loading...
