Mitsubishi Electric MELSEC iQ-RJ71EIP91 - Page 84

82
3 EtherNet/IP Configuration Tool
3.1 Window Structure
• "Check Device Identity" window
*4 This item is displayed when "Custom" is specified for "Check Identity".
Item Description Setting range
Check Identity Specifies the policy of the consistency check. The connection is disconnected if the check
results in a mismatch.
• Disable: The check is not performed.
• Must Match Exactly: Checks whether all items match exactly.
• Must be Compatible: Checks all items and judges there to be no problem if the items are
compatible.
• Custom: The check items are set with "Compatible Mode" and the subsequent items.
• None: The check is not performed. (For EtherNet/IP devices on which check processing
is not available)
• Disable
• Must Match Exactly
• Must be Compatible
•Custom
•None
(Default: Disable)
Compatible Mode
*4
Specifies the compatibility check.
• True: "Minor Version" and subsequent items must be compatible.
• False: "Minor Version" and subsequent items must match exactly.
•True
•False
(Default: True)
Minor Version
*4
Specifies the minor version check.
• Compatible: The check is performed.
• Not Checked: The check is not performed.
• Compatible
• Not Checked
(Default: Compatible)
Major Version
*4
Specifies the major version check.
• Compatible: The check is performed.
• Not Checked: The check is not performed.
• Compatible
• Not Checked
(Default: Compatible)
Product Code
*4
Specifies the product code check.
• Compatible: The check is performed.
• Not Checked: The check is not performed.
• Compatible
• Not Checked
(Default: Compatible)
Product Type
*4
Specifies the product type check.
• Compatible: The check is performed.
• Not Checked: The check is not performed.
• Compatible
• Not Checked
(Default: Compatible)
Product Vendor
*4
Specifies the vendor code check.
• Compatible: The check is performed.
• Not Checked: The check is not performed.
• Compatible
• Not Checked
(Default: Compatible)