84
3 EtherNet/IP Configuration Tool
3.1 Window Structure
■[Module Informations] tab
The parameters of the EtherNet/IP device is displayed.
Items in this window can be used when EtherNet/IP Configuration Tool is switched to the online state. ( Page 50 File)
*1 This item is displayed when "Advanced Mode" is selected. ( Page 50 File)
Item Description
[Refresh] button Updates the displayed parameters of the EtherNet/IP device.
All the initial values are displayed as "###". Clicking the [Refresh] button acquires the information of the
item selected in "Object".
Object
*1
Selects the type of values to read from the EtherNet/IP device.
• Identity: General device information
• Connection Manager: Information about connection
• TCP/IP Interface: Information about TCP/IP network interface
• Quality of Service: Information about communication quality
• Ethernet Link: Information about link-specific counter and IEEE802.3 communication interface status
[Reset Device] button Resets the displayed parameters of the EtherNet/IP device.
Description Displays the description of the selected item.
To Next Page
Loading...
