Mitsubishi Electric MELSEC iQ-RJ71GF11-T2 - Page 136

134
2 PARAMETER SETTINGS
2.3 Basic Settings
 Link Side Set the link refresh ranges of SB and SW. One range can be set for each SB and
SW. ( Page 18 Link refresh)
Device Name
•SB (fixed)
•SW (fixed)
Points
• SB (fixed): 16 to 512
• SW (fixed): 1 to 512
(Default: 512)
Start
• SB (fixed): 0H to 1F0H (set in increments of
16 points)
• SW (fixed): 0H to 1FFH (set in increments
of 1 point)
(Default: 0H)
End
• SB (fixed): FH to 1FFH (set in increments of
16 points)
• SW (fixed): 0H to 1FFH (set in increments
of 1 point)
(Default: 1FFH)
CPU Side Targ et
• Module Label
• Specify Device
(Default: Module Label)
Device Name
• Module label: 
• Specify Device (when link side is SB): SB,
M, L, B, D, R, ZR, RD
• Specify Device (when link side is SW): SW,
M, L, B, D, R, ZR, RD
(Default: Blank)
Points, Start, End
• Range of the device in the CPU module
• Set bit devices in increments of 16 points
and word devices in increments of 4 points.
(Default: Blank)
Item Description Setting range
0000H
01FFH
0000H
01FFH
0000H
01FFH
0000H
01FFH
Device
name
(SB)
Master/local module CPU module
Device
name
(SW)
Device
name
(SB)
Device
name
(SW)
Ex.