150
2 PARAMETER SETTINGS
2.4 Application Settings
Setting example
The following is a setting example to perform interlink transmission from the master station on CC-Link IE Field Network to
stations on CC-Link IE Controller Network. In this example, 128-point data input from the slave station (station No.1) is
transferred.
1. Select "0000: RJ71GF11-T2 (Master Station)" for "Transfer Source Module" and "0020: RJ71GP21-SX (Normal Station)"
for "Transfer Destination Module", and enter the transfer ranges of link devices.
2. Click the [OK] button.
RX200
RX LB
RX27F
LB780
LB7FF
128
points
Slave station
(station No.1)
CC-Link IE
Controller Network
CC-Link IE
Field Network
Master station
(station No.0)
Normal station
(station No.4)
Station No.1 send
range
Station No.2 send
range
Station No.3 send
range
Station No.4 send
range
Control station
(station No.1)
Normal station
(station No.2)
Normal station
(station No.3)
Input
To Next Page
Loading...
