Mitsubishi Electric MELSEC-L Series LD40PD01 - Page 102

100
8 FUNCTIONS OF THE CONFIGURATION TOOL
8.10 Debug Function
CSV file format of simulation execution results
The following shows the CSV format specifications of simulation execution results.
■1st row
[LOGGING], LD40PD01_1, 2, 3, and 4 are output (fixed output).
■2nd row
The data type of the simulation execution result is output.
TRIGGER[*] is output in the last column of the 2nd row (fixed output).
■3rd row
The name of each input or output terminal is output.
Trigger is output in the last column of the 3rd row (fixed output).
■4th to 2051st row
The acquired data is chronologically output (at the set simulation step unit time).
[*] is output in the last column of the 4th row (fixed output).
Item name Character
Delimiter Comma (,)
Return code CRLF (0x0D, 0x0A)
Data type Bit Word (unsigned)
Double word (unsigned)
Word (signed)
Double word (signed)
Value output into a CSV file BIT[1;0] ULONG[DEC.0] LONG[DEC.0]
I/O terminal Name to be output
• Input terminal in the hardware logic outline window
• Output terminal in the hardware logic outline window
Block name, terminal name
• Input terminal in a multi function counter block detail window
• Output terminal in a multi function counter block detail window
Multi function counter block name, block name, terminal name
Window name Block name Terminal Data type Data to be acquired
Hardware logic
outline window
External input block IN 0 to IN B Output terminal BIT[1;0] Indicates the High/Low state of a
terminal.
0: Low state
1: High state
External output block OUT 0 to OUT 7 Input terminal BIT[1;0]
OUT 0_DIF to OUT 5_DIF Input terminal BIT[1;0]
Multi function
counter block
detail window
Counter timer block Counter_Timer_0 to
Counter_Timer_7
RUN terminal BIT[1;0] Indicates the internal action state of
the counter timer block to an input
terminal.
0: Internal action stop status
1: Internal action execution status
STOP terminal BIT[1;0]
UP terminal BIT[1;0]
DOWN terminal BIT[1;0]
PRESET terminal BIT[1;0]
Count Value
terminal
ULONG[DEC.0]/
LONG[DEC.0]
Count value