9 CREATING A HARDWARE LOGIC
9.1 Main Blocks in the Hardware Logic Outline Window
105
9
Link combination
The terminals to which the terminals of each main block can be linked are predetermined. An input terminal and an output
terminal in the same color can be linked. Input terminals or output terminals cannot be linked each other.
The following table lists the combinations.
If multiple output terminals are linked to one input terminal, OR processing is executed on all input signals. If one output
terminal is linked to multiple input terminals, the same signals are output for all the input terminals.
Output side Input side Color
Block name Terminal name Block name Terminal name
External input block Output Parallel encoder block Input Coral
Multi function counter block Input Butterfly yellow
Latch
Logical operation block Input
SSI encoder block Data Coral
Y device terminal Y Multi function counter block Input Pale orange
Latch
Logical operation block Input
OUT terminal OUT
OUT_DIF
Multi function counter block Input Butterfly yellow
Latch
Logical operation block Input
Parallel encoder block Output Multi function counter block Absolute Encoder Celadon
SSI encoder block Clock External output block OUT_DIF Vermeer
Output Multi function counter block Absolute Encoder Celadon
Multi function counter block Output External output block OUT Vermeer
OUT_DIF
SI device terminal SI Empire rose
Event Multi function counter block Event Columbine blue
Cam Output External output block OUT Vermeer
OUT_DIF
Logical operation block Output External output block OUT Vermeer
OUT_DIF
To Next Page
Loading...
