130
9 CREATING A HARDWARE LOGIC
9.2 Multi Function Counter Block
Internal blocks of multi function counter blocks
There are 12 types of internal blocks in a multi function counter block. Control operations can be freely customized by linking
the internal blocks. When a multi function counter block is arranged in the hardware logic outline window, all internal blocks
are arranged in the multi function counter block detail window.
• 32-bit multi function counter block detail window
• 16-bit multi function counter block detail window
Internal block list
The multi function counter internal blocks are as follows.
*1 The cam switch block is arranged across the fourth and fifth sections.
Section Block name Number of arranged items Reference
16-bit counter 32-bit counter
First section Input terminal 2 2 Page 134 Input terminal
Latch input terminal 2 1 Page 134 Latch input terminal
Event input terminal 4 2 Page 135 Event input terminal
Second section Input signal event detection block 1 1 Page 136 Input signal event detection block
Latch event detection block 1 1 Page 143 Latch event detection block
Third section Counter timer block 2 1 Page 145 Counter timer block
Fourth section Comparison block 2 1 Page 158 Comparison block
Cam switch block
*1
01Page 161 Cam switch block
Fifth section Set/reset block 2 1 Page 165 Set/reset block
Sixth section Output terminal 1 1 Page 166 Output terminal
Event output terminal 4 2 Page 167 Event output terminal
Cam switch output terminal 0 1 Page 168 Cam switch output terminal
To Next Page
Loading...
