Mitsubishi Electric MELSEC-L Series LD40PD01 - 10.2 One-shot Timer

176
10 BLOCK LINK EXAMPLES
10.1 Coincidence Detection
The multi function counter block with a link for coincidence detection can be used as a trigger of other multi
function counter blocks. The following shows link examples of the hardware logic outline window and multi
function counter block _0 detail window.
• Hardware logic outline window
• Multi function counter block _0 detail window (coincidence detection)
The multi function counter block_0 counts external input signals. When the count value becomes equal to the
compare value, an event signal is output to the multi function counter block_1.
IN 0
IN 1
Input 0
Input 1
Event 0
Event 0
Multi function
counter block_0
(coincidence detection)
Multi function
counter block_1
Input 0
Input 1
Event 0
Count Value
UP
DOWN
Compare 0
Counter timer
Input signal event
detection block