Mitsubishi Electric MELSEC-L Series LD40PD01 - One-Shot Timer

178
10 BLOCK LINK EXAMPLES
10.2 One-shot Timer
10.2 One-shot Timer
The output signal is turned on for the specified time period using an input signal as a trigger.
The following describes a link and parameter example of a one-shot timer. With the example setting, an output is turned on for
100ms using an external input signal as a trigger. Note that this link example is for when a 32-bit unsigned multi function
counter block is used.
Link and parameter
The following shows a link example of the hardware logic outline window and a link example and parameter setting example
of the multi function counter block detail window.
■Hardware logic outline window
100ms
ON
OFF
ON
OFF
Input signal
Output signal
External output
signal
Trigger signal
Output stop signal