254
APPENDICES APPENDIX
Appendix 5 Added and Changed Functions
Appendix 5 Added and Changed Functions
The following table lists the added or changed functions of the flexible high-speed I/O control module, the configuration tool,
and GX Works2.
Addition/Change Upper five digits of the
applicable product
information number of
the flexible high-speed
I/O control module
Applicable version
of the configuration
tool
Applicable version
of GX Works2
Reference
Security Version 1.001B Page 74 Security
Read from module (Flash ROM) Page 90 Reading data
from the module
SSI encoder block 17102 or later Version 1.002C Page 114 SSI encoder
block
Changes of an external output block
• Addition of Forced Output
• Addition of External terminal
monitor
Page 123 External output
block
Changes of a comparison block
• Coincidence or Range can be
selected for Condition.
• Compare values can be changed.
Page 158 Comparison
block
An event input terminal can be linked
with a Latch terminal of a counter
timer block.
Page 135 Event input
terminal
Switching the language Page 66 Switching the
Language
Copying a block Page 83 Copying a block
Pasting a block Page 84 Pasting a block
Library function Page 85 Library Function
Verifying with the module (Flash
ROM)
Page 91 Verifying with the
module
Module operation Page 92 Module
operation
Addition of monitorable terminals
• External input terminal
corresponding to an external input
block
• Output 0 terminal of a multi function
counter block
• External output terminal
corresponding to an external output
block
17102 or later Page 93 Monitor
Connecting to a head module 19022 or later 1.560J or later Page 34 SYSTEM
CONFIGURATION
Adding a module, switch setting, auto
refresh with GX Works2
Page 204 SETTINGS
To Next Page
Loading...
