Mitsubishi Electric MELSEC-L Series LD40PD01 - Page 33

3 SPECIFICATIONS
3.5 List of Buffer Memory Addresses
31
3
*1 The default value to be set after the power is turned on or the CPU module is reset
*2 Whether a value can be read/written from/to a program or not is indicated.
R: Readable
W: Writable
8105 to 8109 1FA9H to 1FADH System area 
8110 to 8114 1FAEH to 1FB2H Error history No. 11 Same with error history No. 1 0 R
8115 to 8119 1FB3H to 1FB7H System area 
8120 to 8124 1FB8H to 1FBCH Error history No. 12 Same with error history No. 1 0 R
8125 to 8129 1FBDH to 1FC1H System area 
8130 to 8134 1FC2H to 1FC6H Error history No. 13 Same with error history No. 1 0 R
8135 to 8139 1FC7H to 1FCBH System area 
8140 to 8144 1FCCH to 1FD0H Error history No. 14 Same with error history No. 1 0 R
8145 to 8149 1FD1H to 1FD5H System area 
8150 to 8154 1FD6H to 1FDAH Error history No. 15 Same with error history No. 1 0 R
8155 to 8159 1FDBH to 1FDFH System area 
8160 to 8164 1FE0H to 1FE4H Error history No. 16 Same with error history No. 1 0 R
8165 to 8169 1FE5H to 1FE9H System area 
8170 1FEAH RUN LED status monitor 0 R
8171 1FEBH ERR LED status monitor 0 R
8172 to 32767 1FECH to 7FFFH System area 
Address
(decimal)
Address
(hexadecimal)
Name Default value
*1
Read/write
*2