8 FUNCTIONS OF THE CONFIGURATION TOOL
8.6 Project Management
75
8
■Actions to be taken when "Read from Module (flash ROM)" is executed
■Operations that change the security setting
When one of the following operations is performed, the security setting is changed.
Hardware logic in the
module
Description
With a password • The password input window is displayed.
• Only when the input password matches the password in the module, the hardware logic can be read.
Without a password • The password input window is not displayed.
• The hardware logic can be always read.
Operation Security setting
Creating a new project "Enable" is set.
Opening a project The project setting is reflected.
Reading data from the module The setting stored in the flash ROM of the flexible high-speed I/O control module is reflected.
To Next Page
Loading...
