76
8 FUNCTIONS OF THE CONFIGURATION TOOL
8.7 Windows for Creating the Hardware Logic
8.7 Windows for Creating the Hardware Logic
The following two types of window are prepared for creating the hardware logic. The window can be switched between the
hardware logic outline window and the multi function counter block detail window.
Window Description
Hardware logic outline window This window is for creating the outline of the hardware logic in the flexible
high-speed I/O control module. Multi function counter blocks are arranged,
external I/O terminals are linked, and settings are configured in this window.
Multi function counter block detail window This window is for configuring the detail settings of the multi function counter
blocks arranged in the hardware logic outline window.
Switch multi function counter block detail windows (up to eight windows) and
edit each multi function counter block.
Hardware logic outline window
Multi function counter block detail window
Double click
Double
click
Click
To Next Page
Loading...
