8 FUNCTIONS OF THE CONFIGURATION TOOL
8.7 Windows for Creating the Hardware Logic
77
8
Hardware logic outline window
The hardware logic outline window is composed of the following five sections. Depending on the section, the blocks that can
be arranged differ.
Change the setting and wiring of each block to create the hardware logic with various functions.
*1 For details on each block and terminal, refer to the following.
Page 103 CREATING A HARDWARE LOGIC
Section Description Blocks and terminals
that can be arranged
*1
First section The blocks corresponding to inputs to the hardware logic have been arranged in this section.
All the blocks in the first section are arranged when a project is started, and any blocks cannot
be deleted or newly added from the Element Selection window.
• External input block
• Y device terminal
• OUT terminal
Second section Blocks corresponding to encoder inputs are arranged in this section. • Parallel encoder block
• SSI encoder block
Third section Blocks that execute count with external input signals and the internal clock are arranged in
this section.
Multi function counter block
Fourth section Blocks that calculate logical operations to input signals and outputs of multi function counter
blocks are arranged in this section.
Logical operation block
Fifth section The blocks corresponding to outputs of the hardware logic have been arranged in this section.
All the blocks in the fifth section are arranged when a project is started, and any blocks cannot
be deleted or newly added from the Element Selection window.
• External output block
• SI device terminal
To Next Page
Loading...
