140
12.7.2 Parameter setting
The following is the pairing open setting.
*1 When "Enable" has been set in "Pairing Open" for a send connection, the following window appears.
When the button is selected, the applicable connection becomes a receive connection, and the next
connection is automatically set as a send connection. (When "Enable" has already been set in "Pairing Open", the
setting is overwritten.)
Because the fixed buffer of the connection with the connected device (for receiving) and the fixed buffer of the next
connection (for sending) are paired, set connection numbers 1 to 7 and 9 to 15 as receive connections. (Connection
numbers 8 and 16 cannot be set.)
Item Description Setting range
Pairing Open
Set "Pairing Open" of the receive connection to "Enable". The next connection is
automatically set as a send connection.
*1
To Next Page
Loading...
