Mitsubishi Electric MELSEC-L Series - Parameter Setting

157
CHAPTER 13 COMMUNICATIONS USING A RANDOM ACCESS BUFFER
13
13.3 Parameter Setting
13.3 Parameter Setting
Set the following parameters to perform communications using a random access buffer.
• Basic setting ( Page 66, Section 7.1.2)
• Ethernet operation setting ( Page 67, Section 7.1.3)
• Open setting ( Page 69, Section 7.1.4)
Item Description Setting range
Fixed Buffer
Communication
Select the communication method for communications using a fixed buffer. Select
"Procedure Exist" for communications using a random access buffer.
Procedure Exist