97
CHAPTER 11 DATA COMMUNICATIONS USING THE PREDEFINED PROTOCOL
11
11.1 Data Communication Procedure
11.1 Data Communication Procedure
By using the predefined protocol support function, data can be communicated with the connected device in the
following procedure.
1. Display the "Predefined Protocol Support Function"
window.
[Tool] [Predefined Protocol Support Function]
[Ethernet Module...]
2. Create a new file.
[File] [New...] "Add"
3. Select "Predefined Protocol Library" or "Add New"
in the "Add Protocol" window.
When "Predefined Protocol Library" is selected, select
the protocol from Predefined Protocol Library registered
in GX Works2.
If "User Protocol Library" is selected in the "Add Protocol" window, protocols saved by user can be read. For details on the
User Protocol Library, refer to the following.
GX Works2 Version 1 Operating Manual (Intelligent Function Module)
To Next Page
Loading...
