Mitsubishi Electric MELSEC-Q Series - Setting Labels

4.3 Labels
4.3.4 Setting labels
4-17
4
PROGRAM CONFIGURATION
4.3.4 Setting labels
Labels used in a program require setting of either global label or local label.
The following describes setting examples of the arguments g_int1 and g_int2 of the DMOV
instruction.
● Using the arguments of the DMOV instruction as global labels
Set the Class, Label Name, Data Type, Device, and Address.
● Using the arguments of the DMOV instruction as local labels
Set the Class, Label Name, and Data Type.
X0
DMOV
EN ENO
ds g_int2g_int1