Mitsubishi Electric MELSEC-Q Series - Setting and Communication Contents

268
8.1.2 Setting and communication contents
Consider each station send range of LB/LW and set the parameters.
Using a parameter sheet is helpful to determine each station's send range of LB/LW and parameters. ( Page 645,
Appendix 5)
Before considering parameters of each station, consider each station send range of LB/LW with the link device
assignment sheet. ( Page 650, Appendix 5.1)
Ex.
Filling in the link device assignment sheet
Consider parameters of the CC-Link IE Controller Network module based on the contents of the link device
assignment sheet.
Station
No.
Data description Assignment link device
Send source Send target Link relay (LB) Link register (LW)
LB to ( points) LW to ( points)
LB to ( points) LW to ( points)
LB to ( points) LW to ( points)
LB to ( points) LW to ( points)
LB to ( points) LW to ( points)
LB to ( points) LW to ( points)
LB to ( points) LW to ( points)
LB to ( points) LW to ( points)
LB to ( points) LW to ( points)
LB to ( points) LW to ( points)
LB to ( points) LW to ( points)
LB to ( points) LW to ( points)
1
2
3
4