Mitsubishi Electric MELSEC-Q Series - Page 344

342
(c) READ instruction settings
Control data settings for the READ instruction are shown below.
Device Item Set value
(S1)+0 D200 Error completion type
0081
H
(Clock data at the time of error completion is set.)
(S1)+1 D201 Completion status
—
(Set by the system, no setting required)
(S1)+2 D202 Channel used by own station 1
(S1)+3 D203 Target station's CPU type
0000
H
(Control CPU)
(S1)+4 D204 Target station network No. 1
(S1)+5 D205 Target station No. 4
(S1)+6 D206 (Unused) 0
(S1)+7 D207 Number of resends 5 times
(S1)+8 D208 Arrival monitoring time 0 (10 seconds)
(S1)+9 D209 Read data length 5 words
(S1)+10 D210 (Unused) 0
(S1)+11 D211 Clock set flag
—
(Set by the system, no setting required)
(S1)+12
to
(S1)+15
D212 to
D215
Clock data on error completion
(S1)+16 D216 Error-detected network No.
(S1)+17 D217 Error-detected station No.