Mitsubishi Electric MELSEC-Q Series - Z(P).RTMRD (Clock Data Read from Programmable Controllers on Other Stations)

459
CHAPTER 9 DEDICATED INSTRUCTIONS
9
9.16 Z(P).RTMRD (Clock Data Read from Programmable Controllers on Other Stations)
9.16 Z(P).RTMRD (Clock Data Read from Programmable
Controllers on Other Stations)
This instruction is used to read clock data from a programmable controller on another station.
*1 If the originating station is a Basic model QCPU (function version B or later), Universal model QCPU, or safety CPU, " "
(double quotation) of the first argument can be omitted.
Setting
data
Available devices
Internal device
(System, User)
File
register
R, ZR
Link direct
device J\
Intelligent
function
module device
U\G
Index
register Zn
Constant
Others
Bit Word Bit Word K, H $
n1 — — —
n2 — — —
n3 — — —
(D1) — — — —
(D2) ———
Z.RTMRD "Jn"
*1
*1
*1
*1
n2 n3 (D1) (D2)
ZP.RTMRD "Jn" n2 n3 (D1) (D2)
Z.RTMRD "Un" n2 n3 (D1) (D2)
ZP.RTMRD "Un" n2
n1
n1
n1
n1 n3 (D1) (D2)
Z.RTMRD
Start contact
[Instruction format][Execution condition][Instruction symbol]
ZP.RTMRD
Start contact
Z.RTMRD
Start contact
ZP.RTMRD
Start contact