480
(c) Devices used in the program example
• Link special relay (SB)
• For details of link special relay (SB): Page 568, Appendix 1
• Devices used by the user
*1 Save the station No. of the own station in the latch-set device or file register.
(d) UINI instruction settings
Control data settings for the UINI instruction are shown below.
(e) Program example
Device Description Device Description
SB0070 Station No. setting (own station) —
Device Description Device Description
M0 Control data setting command
D100 to
D109
Control data
M1 Start contact D622 Error code storage device
M5 Completion device ZR0
Own station No.
*1
M6 Completion status indication device —
Device Item Set value
(S1)+0 D100 (Unused) 0
(S1)+1 D101 Completion status
—
(Set by the system, no setting required)
(S1)+2 D102 Modification specification
0001
H
(S1)+3 D103 Own station No. ZR0 (= 2)
(S1)+4 to (S1)+9 D104 to D109 (Unused) 0
Control data setting
for UINI instruction
Execution of UINI
instruction
Error code reading,
etc.
Processing program on completion of station No. setting
Processing program for normal completion
Processing program for error completion
To Next Page
Loading...
