Mitsubishi Electric MELSEC-Q Series - Page 539

537
CHAPTER 10 TROUBLESHOOTING
10
10.3 CC IE Control Diagnostics 10.3.4 System monitor
(1) H/W information
The LED information and switch information of the module can be checked.
Item Description
Module
Module Name Displays the name of a module.
I/O Address Displays the start I/O number of a module.
Mount Position Displays the slot position where a module is mounted.
Product Information
Displays product information.
• The end of the product information indicates function version of the module.
• When the end is "B", it indicates the module of function version B.
Module
Information
Module access "Possible" is displayed when a watchdog timer error does not occur.
Status of I/O Address
Verify
The parameter setting and the verification result of the mounted module are displayed.
Error Information
Latest Error Code
Displays the latest error code. ( Page 511, Section 10.2)
Update Error History
The history of error codes is displayed by clicking this button. ( Page 511,
Section 10.2)
Error and Solution The description and corrective action of an error code selected in the error information.
H/W Information The LED information and switch information of the module can be checked.