540
10.3.5 Remote operation
The operating status of the CPU module that is connected to a network can be changed.
1. To open the "Remote Operation" window in the programming tool, perform any one of the
following operations.
• Click button in the "CC IE Control Diagnostics" window.
• Select [Online] [Remote Operation] menu.
2. The "Remote Operation" window is displayed.
3. Set the following item and click button.
Item Description
Connection Channel List The connection target information is displayed.
Specify Execution Target
Set a target station of remote operation.
• Currently Specified Station: Remote operation is executed to the displayed "Target
PLC".
• "Target PLC" can be changed by changing "Select Station" in the "CC IE Control
Diagnostics" window.
• All Stations: Remote operation is executed to all stations in the network specified in
"Specify Execution Target".
• Specified Group: Remote operation is executed to the specified group No. in the
network specified in "Specify Execution Target".
Operation Select the operating status to be changed.
Operation during RUN Select the operation of the device memory and signal flow during RUN.
To Next Page
Loading...
