555
CHAPTER 10 TROUBLESHOOTING
10
10.4 Checking the Error Description with the CC IE Control Diagnostics
10.4.7 Own station No. duplication
(2) Adding station to a network
(a) When a programming tool connected station is normally operating
(b) When a programming tool connected station is faulty
Select the own station.
Multiple stations with the station No.3 are displayed, indicating that the same
station No. is used for multiple stations. Change the station No.
Control
station
No.1
Normal station
No.2
Normal station
No.3
Normal station
No.3
Selected
station
Added station
Select the own station.
Stations equivalent to the maximum number of stations that can be connected
are displayed due to a parameter error.
An error has occurred in the station No.3.
Click the error details button.
The Error Factor field indicates that the station No.3 is already used.
Take corrective actions according to the troubleshooting.
Control station
No.1
Normal station
No.2
Normal
station
No.3
Normal station
No.3
Selected
station
Added station
To Next Page
Loading...
