App - 1
For external dimensions of modules shown in this handbook, refer to the user's manual for each
module.
(1) The general specifications of programmable controllers are as follows. Please do not
store spare parts under a high temperature or high humidity condition, even within the
range guaranteed by the specifications.
(2) Store in a place avoiding direct sunlight.
(3) Store under a condition with no dust or corrosive gas.
(4) The battery capacity of a A6BAT battery or a lithium-coin battery (commercially
available) for memory card will be decreased by its self-discharging even when it is not
used. Replace it with new one in 5 years as a guideline.
(5) For a power supply module, CPU module with built-in power supply, or analog module
that uses any aluminum electrolytic capacitor, which is indicated in the table below, take
the following measures since the characteristics will be deteriorated when the
aluminum electrolytic capacitor is left un-energized for a long time.
[Countermeasures for preventing aluminum electrolytic capacitor characteristics deterioration]
Apply the rated voltage to the aluminum electrolytic capacitor for several hours to activate it. Or,
rotate products at the periodic inspection (in every 1 to 2 years).
[Reference]
The life of an aluminum electrolytic capacitor, even if not used, under a normal temperature
decreases approximately at 1/4 speed of the case when it is energized.
APPENDICES
Appendix 1 External Dimensions
Appendix 2 Spare Parts Storage
Storage ambient temperature -20 to 75°C
Storage ambient humidity 10 to 90%, no condensation
Product Model (AnS series)
CPU module
(Power supply built-in type)
A1SJHCPU
Power supply module A1S61PN, A1S62ON, A1S63P
Analog module
A1S64AD, A1S68AD, A1S62DA, A1S68DAI, A1S68DAV, A1S63ADA,
A1S66ADA
To Next Page
Loading...
