Mitsubishi Electric MELSEC-Q Series - Starting GX Developer; Creating a New Project

16
 Starting GX Developer
Operating procedure
After starting, the GX Developer main screen is displayed.
 Creating a new project
Operating procedure
Select [Start]  [All Programs]
 [MELSOFT Application]
 [GX Developer].
1 Select [Project] 
[New project]
( key + key) ( ).
2 Select QCPU (Q mode).
3 Select the QCPU to be used
(Q02UCPU in this manual).
4 Click the button.
A project tree is displayed.
A ladder screen is displayed.