Mitsubishi Electric MELSEC-Q Series - Page 251

5 - 131
Chapter 5 Data Used for Positioning Control
Setting value
Default
value
Buffer memory address
Set with a decimal.
Setting
value
K
Flash ROM write request
1: Requests write access to flash ROM.
The Simple Motion module resets the value to "0" automatically when
the write access completes.
(
This indicates the com
p
letion of write o
p
eration.
)
1
0 5900
Set with a decimal.
Setting
value
K
Parameter initialization request
1: Requests parameter initialization.
The Simple Motion module resets the value to "0" automatically
when the initialization completes.
(This indicates the completion of parameter initialization.)
1
0 5901