10 APPENDIX
10.5 Gear reducer model designation
219
10
HK-ST_G1/G1H
Gear reducer model designation
For the reduction ratio, check the item "RATIO" on the gear reducer rating plate. For details of the items indicated on the gear
reducer rating plate, refer to "Cyclo® 6000" of Sumitomo Heavy Industries, Ltd.
*1 Refer to the following for the frame No.
Page 161 Exclusive specifications
*2 The area where the gear reducer rating plate is attached to varies depending on the model.
HK-ST_G5/G7
Gear reducer model designation
F
V
W
N
C N H M - 6 1 0 0
H
H
Symbol indicating
the model
(Cyclo Drives
Speed Reducer)
Mounting method
Input-side type (geared motor)
Symbol Mounting method
Flange-mounting
Foot-mounting
Shaft direction
Symbol Shaft direction
Vertical type/shaft direction vertically downward
Reverse vertical type/shaft direction vertically upward
Any mounting direction
Frame No.
*1
Horizontal type/shaft direction horizontal
Rating plate area
*2
(reverse side)
H P G - 2 0 A - 0 5 - J 2 -
11
05
1/11
21 1/21
1/5
33 1/33
45 1/45
J2
F0
J6
Straight shaft
(without key)
Series Model number Shape symbol
Reduction ratio
Symbol Reduction ratio
Shaft shape
Symbol Shaft shape
Flange output
Straight shaft
(with key and center tap)
Rating plate
(reverse side)
To Next Page
Loading...
