Mitsubishi Electric MELSERVO-JN Series - 5.3.2 Display examples

5 - 5
5. DISPLAY AND OPERATION SECTIONS
5.3.2 Display examples
POINT
The following is priority order of the status display when two or more decimal
points need to be displayed.
1. Alarm occurrence, test operation
2. Negative values
The following table lists display examples.
Item Status
Displayed data
Servo amplifier display
Servo motor
speed in 10r/min
unit
Forward rotation at 2500r/min
Reverse rotation at 3000r/min
Lit
Reverse rotation is indicated by the lit decimal points in the upper two digits.
Servo motor
speed in r/min
unit
Forward rotation at 250r/min
Reverse rotation at 300r/min
Lit
Reverse rotation is indicated by the lit decimal points in the upper two digits.