Mitsubishi Electric MELSERVO-JN Series - 11.4 MR Configurator;MR Configurator2; 11.4.1 About engineering software

11 - 27
11. OPTIONS AND PERIPHERAL EQUIPMENT
11.4 MR Configurator/MR Configurator2
11.4.1 About engineering software
The following engineering software can be used for this servo amplifier.
Engineering software Installation Guide
MR Configurator MRZJW3-SETUP221 MR Configurator MRZJW3-SETUP221E INSTALLATION GUIDE (IB (NA) 0300082)
MR Configurator2 SW1DNC-MRC2-E
MR Configurator2 Version1 SW1DNC-MRC2-_ INSTALLATION GUIDE (IB (NA)
0300163ENG)
For specifications of the engineering software and system configuration, please refer to each installation guide.
(1) How to update parameter setting range
When expanding the setting range of the parameter is required, please update the parameter setting range
as follows.
(a) MR Configurator
Connect to MR-JN-
A, and check "Reading setting range of parameters."
(b) MR Configurator2
Refer to the technical news (How to use the Update Parameter Setting Range Function on MR
Configurator2 (SV-A-0001)).