Mitsubishi Electric MELSERVO-JN Series - 12.4 Connector dimensions

12 - 13
12. SERVO MOTOR
12.4 Connector dimensions
The connector dimensions for wiring the servo motor are shown below.
(1) TE Connectivity
2174053-1
[Unit: mm]
19.6
13.5
6.5
24.6
22
19
31.1
(Note)
13.6
Note. The recommended screw tightening torque is 0.1 N m.
Crimping tool: 1596970-1 (for ground clip)
1596847-1 (for receptacle contact)
(2) JAE
JN4FT02SJ1-R
[Unit: mm]
26.6
17
12.3
19
14.3
φ11.6
11.8
2.5
(Note)
Note. The recommended screw tightening torque is 0.2 N m.
Crimping tool: CT170-14-TMH5B