12 - 32
12. SERVO MOTOR
(b) Specifications
Item Description
Servo motor HF-KP G1
Mounting method Flange mounting
Mounting direction In any directions
Grease lubrication (Already packed) (Note 1)
Lubrication
method
Packed
with
50
100W
200W
400W
1/12
1/20
200W
400W
1/5
Mobilplex 46
Exxon Mobil
Corporation
Molynoc AP2
Nippon Oil
Corporation
Mobil Grease SP
Exxon Mobil
Corporation
Output shaft rotating
direction
Same as the servo motor output shaft direction.
With an electromagnetic
brake
Available
Backlash 60 minutes or less at reduction gear output shaft
Permissible load to motor
inertia moment ratio
(converting into the servo
motor shaft)
(Note 2)
For 50W, 100W: 5 times or less
For 200W, 400W: 7 times or less
Reduction gear efficiency
(Note 3)
45 to 75%
Note 1. Already packed with the grease.
2. If the above indicated value is exceeded, please contact your local sales office.
3. The reduction gear efficiency differs depending on the reduction ratio. Also, it varies
depending on the use conditions such as the output torque, speed, temperature, etc. The
numerical value in the table is a typical value in the rated torque, rated speed and typical
temperature, and not a guaranteed value.
To Next Page
Loading...
