Mitsubishi Electric MELSERVO-JN Series - 3.9 Treatment of cable shield external conductor

3 - 40
3. SIGNALS AND WIRING
3.9 Treatment of cable shield external conductor
In the case of the CN1 and CN2 connectors, securely connect the shielded external conductor of the cable to
the ground plate as shown in this section and fix it to the connector shell.
SheathExternal conductor
Strip the sheath.
Core
External conductor
Sheath
Pull back the external conductor to cover the sheath.
(1) For CN1 connector (3M connector)
Screw
Screw
Ground plate
Cable
(2) For CN2 connector (3M or Molex connector)
Screw
Cable
Ground plate